Top 7 Signs It’s Time to Restain the Wood Materials on Your Deck

Brad BurnsUncategorized

It is common for deck owners to ignore the condition of their wood until it is too late. Many signs point to the need for wood restaining, and some of them can go unnoticed, which often leads to rotting or splitting boards. Here is what to look for:

1. Stains On The Deck

If you find stains on your deck, they might be caused by rotting wood. Ensure to check the wood for soft or rotted areas and have them replaced as soon as possible to avoid further damage.

2. Peeling or Flaking Paint

If there is peeling paint or flaking paint on your deck, it could be a sign of wood rot. This can also happen if you used water-resistant paint and it has not been appropriately maintained. The best way to restore the quality of the original wood is to sand off the paint and restain your deck.

3. Cracks on the deck

It is normal to see a few splinters or cracks on your deck, but if there are lots of them, it’s time to restain the deck. These can often appear after heavy rain or after repeated pressure. If they are not repaired promptly, they could lead to rotting and splitting.

4. Loose or Wobbly Boards

Wood can get loose if it is resting on a joist or other supporting structure. Make sure to check the boards for loose spots regularly. If there are any, have them repaired before you restain the deck.

5. Mold and Mildew

Mold and mildew are a sign of moisture damage and wood rot. They can appear in moist areas of a deck and can be dangerous to your health. They can also make it difficult for your new paint to stick, so ensure the area is dry before you restain the deck.

6. Old, Grey Wood

Old, grey wood has lost its natural moisture and color. It can be caused by heating or air conditioning systems or exposure to sunlight. Even with proper maintenance, it is likely the wood will fade. You can restore its color and condition by sanding it down and applying a new stain.

7. Curling Edges

Curling edges signify that the wood is drying out and becoming less dense. It can also be caused by exposure to direct sunlight, not enough humidity in the surrounding area, and even improper watering of your plants and grasses.

In conclusion, wood restaining is an excellent way to restore the look and quality of your wood. It is also an excellent way to protect your home, and it adds value to your property. Make sure to have the wood restained by professionals regularly so you can avoid unexpected repairs.

The DIY Process of Installing Shiplap on Your Walls and the Tools You’ll Need

Brad BurnsUncategorized

Something a lot of people often overlook when giving their house a new look is the ceiling. Shiplap is made of wide boards, so when you install it as your ceiling, it makes the room feel even more spacious. Shiplap is a very versatile option that you can customize with paint choices from subtle wood tones to fun pops of color. This post will show you the tools and steps for installing shiplap on your walls.

Tools required

Measuring tape

To get started, you’ll need a measuring tape. Not only will you need it to measure your space, but you’ll also use it to make sure each piece of shiplap is cut to the right length.

Dust mask

This will help protect you from breathing in dust and particles.

Safety glasses

These are there to protect your eyes from dust, nails, or wood flying into them (even if you’re wearing safety goggles) and even from the nail gun recoil.

Circular Saw or Miter Saw

To cut your shiplap planks, you can use either a circular saw or a miter saw. For large areas of shiplap, it’s best to use a miter saw.

Hearing protection

A good pair of earplugs or earmuffs will help keep your ears safe while using power tools.

Chalk line

A chalk line is a small container of powdered chalk attached by a string to a metal reel. When you pull the string tight and snap it, the chalk marks a straight line on the wall or floor. You’ll use it for marking where to place your first row of boards.

Table Saw

A table saw is the primary tool used to cut down your planking and trim it once it&#x2019s on the wall. While you can use a circular saw or hand saw to cut down your wood planks, the precision of a table saw will ensure that your cuts are straight, even, and consistent from plank to plank.

Chop saw

Depending on the width of your shiplap, you will probably use a chop saw to cut it. Make sure you have a 12-inch chop saw with a carbide blade that can cut through both hardwood and softwood.

80-grit sanding sponge

Sanding sponges are flexible, making them easy to maneuver around tight corners. They’ll get into the grooves of your shiplap and help smooth out any rough edges.

Interior paint

Interior paint is a type of paint that is used on the interior walls of homes. It can be made of several different ingredients, but primarily water and some sort of pigment. There are many different types of interior paint, each with its own specific properties.

Paintbrush

You&#x2019ll need a paintbrush to get the job done. If you aren&#x2019t using a paint sprayer and plan on a painting by hand, be sure to invest in a quality paintbrush. The bristles should be firm, and they should feel comfortable in your hand.

Paint roller

You’ll need a paint roller to apply the primer and paint to your shiplap. You can use a high-quality thick nap roller for both. Or you can use a thinner nap (1/2 inch) for the primer, then switch to a thicker nap (3/4 inch) for the finish coat.

Paint roller pan

Paint rollers are usually used for walls and ceilings. The roller pan is the flat, rectangular tray that holds the paint you’ll be applying to your room. A typical paint roller pan is made of lightweight metal or heavy plastic.

Putty knife with metal blade

A putty knife is all you need to apply the adhesive, and a metal-blade putty knife is best for scraping the walls clean. If your walls are in particularly bad shape, use a larger putty knife for the first scraping and then switch to a smaller one for applying the adhesive.

Nails and nail gun

You’ll be using nails to attach your shiplap planks to the wall, so either hammer in a nail by hand or use a nail gun. A nail gun is a quick, easy way to install a shiplap. If you’re tackling a small space, you could get away with nailing the boards on by hand. But if you’re covering a large area, using a nail gun will save you time and energy.

1/8-inch spacers

You can use these between each board to create a perfectly even space between each board. The gap between boards is both decorative and serves a purpose in allowing room for expansion and contraction of the wood.

Process of Installing Shiplap

Step 1

Measure the length of the wall you want to install shiplap on. Measure the height of the wall from the floor to the ceiling, which will determine how many rows you will need.

Step 2

Cut a piece of shiplap using your circular saw. Cut each piece about 1/4 inch longer than your measurements for the height and width of your wall.

Step 3

Place a level on top of one end of the first board and mark with a pencil where you need to cut off any excess wood. Cut the wood off with your circular saw before installing it on your wall.

Step 4

Nail a piece of shiplap directly on top of your subflooring with a hammer and finishing nails. Make sure the nail heads are not visible after you install each board by hammering them slightly below the surface level of each board so they are hidden when you install another board over them at the height of your walls (this will allow for space at the top). Cut each board using a saw for a precise cut.

Shiplap installation may be a relatively simple DIY job, but it will undoubtedly require careful attention to detail and patience. Following these steps will help save you time, money, and effort. But don&#x2019t forget that the most important tool for any of your DIY projects is not your hammer or the screwdriver; it is dedication.

5 Ways You Can Reinvent Various Rooms of the Home By Adding Crown Molding to the Ceilings

Brad BurnsUncategorized

Crown molding has been a feature in architectural homes for centuries. And although it wasn’t always used to decorate the tops of walls, it was originally designed to hide the ends of beams, which were placed on top of the heads of doorways and windows. Crown molding can be installed in virtually any room of the house, adding elegance and sophistication to any room it is placed in, as well as adding value to your home.

Add Visual Depth and Dimension

One way that ceiling crown molding can help update the look of your home is by adding visual depth and dimension to any room. The right crown molding can make low ceilings appear higher or high ceilings lower. Be sure to pick out the right color and style of crown molding so that it matches not just with your walls but also with your furniture.

Create Focal Points in Each Room

Ceiling crown molding is a great way to create focal points in each room. By using a different style or color for each room, you can help create a unique look for every area without having to redecorate or repaint. You can also use ceiling crown molding as a transitional piece between two rooms, making it easy to give each space its own distinctive look and feel.

Use Colorful Crown Molding to Add a Pop of Color

This type of crown molding has a two-tone look that adds depth and interest to the space. The upper portion of the molding consists of two flat boards painted white, while the lower portion is made up of two rounded boards painted yellow. A light blue ceiling ties this entire look together for a bright, cheerful design scheme. This would be especially attractive in a child’s room.

Create an Accent Wall with Crown Moldings

A great way to create an accent wall in your home is by installing crown moldings on one side of it. These types of walls tend not to be as popular anymore, but they’re still very beautiful when done correctly. If you don’t want the whole house painted just yet, then this might be something worth considering for now until you decide otherwise (and if ever).

Keep Things Light and Simple with White Crown Molding

One great way to use crown molding is to keep things simple. If you have white walls and an overall light color palette going on in your home, then using white crown molding can really add some beauty without adding any additional color. This can be helpful if you have a small room that you want to not seem so small or if you want a room to look brighter than it normally does.

Take some time to walk through each room in your home and think about how the crown molding might alter its overall look. Once you have selected the right color and material, measure out the length needed for each room of your new home. Remember that some rooms will need two or even three different types of molding to achieve a balanced look, while others may only need one or two different types. The options are limitless when it comes to crown molding. Take stock of what you have to work with, then bring your vision to life using these five tips.

Ice Melting

Brad BurnsUncategorized

Ice melting services are important to prevent accidents caused by slippery roads. This is because snow, sleet, and ice can all become slippery and dangerous when the roads get cold. These complications often occur in the winter and take a lot of drivers off guard, sometimes causing them to lose control of the vehicle. With ice melting services at hand, we can effectively melt any and all snow, sleet, and ice that covers the roads to safely and easily prevent such accidents from happening.

Keep our roads safer

Roads in the winter can be extremely slippery. Snow, ice, rain, and heavy traffic can make driving a lot more dangerous than it should be. We have all seen on the news accidents that happen because someone is going too fast for conditions or has accidentally skidded off the road and hit a pole or tree.

Ice melting services are beneficial to drivers and the general public. Ice melting products help reduce the number of accidents caused by ice and snow on the roadways. Not only is it safer for drivers, but it is also safer for the environment.

Reduce the risk of black ice

Black ice refers to a thin layer of transparent solid that forms on the road surface when the temperature is below freezing point. Black ice is a serious hazard and can cause major problems for drivers, especially when combined with precipitation like rain or snow.

Black ice forms when the air temperatures are below freezing point, and then the water droplets on the road do not have a chance to turn into ice due to the quick influx of heated air from vehicle engines.

Treating these roads with an anti-icing solution helps prevent this dangerous sheet of ice from forming on roadways. By preventing black ice formation, we help reduce the risk of accidents caused by black ice.

It makes it easier for you to drive

One of the main benefits of ice melting is that it makes roads safer. This means that there is less risk of accidents and less risk of damage to vehicles. If you are a professional driver, this can be very important to you, as damaged cars cost a lot of money to repair.

Snow and Ice Services Companies employ snow removal professionals to remove snow and ice from sidewalks, driveways, parking lots, bridges, streets, and other areas. The primary goal in snow removal is to create a safe environment for people who have to walk or drive in the area where snow removal work is carried out.

Why You Should Choose Marvin Windows

Brad BurnsUncategorized

Marvin realizes people spend more time indoors, which opens up new possibilities for how people live and feel. Marvin started as a family-owned and operated lumber company in 1912, and they’ve looked for ways to make lives better by raising the bar and building beauty and quality into their products since then. There are many reasons why people love Marvin Windows, and below are only a few of them.

When you’re looking for windows that provide aesthetics and performance, Marvin windows has the style and type of windows you want. Marvin offers innovative window solutions with industry-leading sizes and an ability to mix and match. Whether the window type you seek is an awning, casement specialty-shape, or something else, there’s nothing like a Marvin window.

Durable

Marvin designs their windows to protect your home against the elements with impact-resistant glass. This glass stands up against damage from hurricane-force winds due to two laminated glass layers that help stop debris. When the glass in the window breaks, the laminated layers help the window maintain its overall integrity.

Energy-Efficiency

Homeowners look for ways to make their homes more energy-efficient as it helps to keep their homes comfortable and lowers their utility bills. Marvin offers energy-efficient windows that reduce heat loss with thin, transparent metallic oxide layers that suppress heat flow and reflect heat back inside the home. This layer helps to minimize heat loss, and during the warmer months, this layer helps keep cool air inside.

Friend Of Turtles

Marvin’s products meet Sea Turtle Conservation Codes that helps to ensure that newly hatched sea turtles find their way to the ocean. Light and reflection from windows can disorient freshly hatched sea turtles, which causes them to wander inland where they die from dehydration, predation, or run over by vehicles.

Marvin believes in striking the perfect balance between performance and style. No matter where you live and the climate, the high-performing thermal properties help keep your home comfortable all year long. Contact Marvin today so our experts can help you turn your dreams into reality.

Home Projects with longer lead times

Brad BurnsUncategorized

Longer lead times are an inevitable part of the business cycle. There is no way to avoid them. However, as a homeowner embarking on various home improvement projects, it is crucial to know how long it will be before you see the outcome of your work.

What are long lead times?

A long lead time is defined as the amount of time between purchasing inventory or ordering an item and when customers can receive the merchandise or service. This can range from a few days to several months.

What home projects are impacted by long lead times?

Any project that involves purchasing long lead time materials is subject to the long lead time and will be impacted by increased costs and delays. This can include:
1. Roofing
The time it takes for a roof to be completed, from the time materials are ordered until the time the roof is installed, can add months to your project. This can cause you to cancel your plans or postpone work on another part of your home.
2. Flooring
A home improvement project requiring carpet or vinyl flooring can have a long lead time. This means the order will have to sit on the shelf for a while before you can install it. A long lead time also means that your project will cost more in the long run.
3. Bathroom remodeling
The materials you need to complete a bathroom remodel can be very expensive. This means that you will be paying high prices for the supplies. If you need to wait on materials, the cost of your project will continue to rise.
4. Kitchen remodeling
The kitchen is the heart of the home. It is no wonder that most homeowners want to update their kitchens. When installing new countertops, you have to have all of the materials and supplies you need. This can mean waiting on a shipment for long lead time items or waiting for the sink to be installed before starting working on your project.
5. Painting
Painting a room in your home is a quick project. However, it can take weeks to months for the paint to dry before you can move on to other projects. If you are working with long lead time items such as paint, this can cause delays and increased costs.

How do supply chains contribute to long lead times?

The supply chain is a complex network of companies and people that works together to get raw materials from suppliers to manufacturers, distributors, and retailers. The supply chain is often a significant contributor to the long lead times found in home improvement projects. Here is how the supply chain can contribute:
1. Manufacturing time
The time it takes to manufacture an item is often the longest part of the supply chain. The manufacturing process can take months, even years, from when raw materials are purchased to when it is released for sale. It ends up taking a long time because the raw materials must be prepared and processed before they can be used.
2. Transportation time
Products bought from overseas have an extended lead time due to transportation problems. The air freight company may have trouble delivering the materials. The owner of the material will have to pay extra to receive it sooner.
3. Distribution time
With a supply chain of larger companies, the product may have to be transported to many different locations. At any one of these locations, there may not be a large enough amount of inventory to buy all the products that need to be purchased. This means that the products will not be viewed from a large enough perspective to make necessary adjustments.
4. Sourcing time
Finding suitable raw material is an integral part of the supply chain. It isn’t easy to find the right company and material. The product may take months to arrive, or it may be impossible to find the product at all.
5. Consumer demand
The consumer in a supply chain tends to be the last point of contact. As a result, there is a large disconnect between the consumer and the source. There is less communication between the two parties, and more problems arise from the lack of communication.
6. Delivery Times
There is a very long lead time for many products until the product is actually delivered. This can be due to a wide disparity between how long it takes to get the product to a store, as opposed to how long it takes for delivery within the store.

In summary, every person and company in a supply chain can contribute to long lead times. The longer the process of making a product, the more potential mistakes and breakdowns occur. You can hire a professional for your home project; that way, you know the project will be completed to your satisfaction. Lakeside Quality Building Products, Inc. provides construction project services to residential and commercial customers. These services include home remodeling, interior, and exterior remodel, addition construction, and new home build.

team Lakeside bowling participants of the CDS Wolf Foundation 12th Annual Strike For Abilities Bowling Party

CDS Wolf Foundation 12th Annual Strike For Abilities Bowling Party

lakesidNews & Events

Lakeside Roofing & Siding participated in the CDS Wolf Foundation 12th Annual Strike For Abilities Bowling Party recently benefiting people served by CDS Life Transitions, as they reach for their dreams of independent and fulfilling lives in our community. Support of this event enables CDS Life Transitions to provide high-quality supports and services to the people we assist. Proceeds will benefit community living opportunities, residential improvements, Warrior Salute Veteran Services, and other unfunded areas of need at CDS Life Transitions.

MI Windows sold at Lakeside Roofing & Siding

Introducing Blinds-Between-The-Glass from MI

lakesidNews & Events

Stylish, Energy Efficient, and Safe.

MI Windows and Doors 1600 series Blinds-Between-The-Glass are a sleek solution for controlling light and privacy which also protects against solar heat gain and damaging UV rays that can fade fabrics and floors in your home. And with blinds-between-the-glass, you don’t have to worry about the blinds falling or small children or animals becoming entangled in them.

Holy Childhood Golf Tournament

Holy Childhood Golf Tournament

lakesidNews & Events

Team Lakeside participated in the 27th Annual Holy Childhood Golf Tournament held at Midvale Country Club June 18th.  We were proud to sponsor and take part in this fantastic event for such an exceptional and worthy cause holychildhood.org